TRISTAR: Triple-Signal Stair Recognition and Vision-Only Indoor Navigation for Search-and-Rescue Micro-UAVs
Indoor search-and-rescue (SAR) operations often require rapid situational awareness where GNSS signals are unavailable and human access is difficult or hazardous. While most autonomous aerial systems rely on LiDAR, stereo vision, or specialized depth cameras, such solutions increase both hardware complexity and deployment costs. This paper presents a complete autonomous indoor navigation framework for low-cost unmanned aerial vehicles based exclusively on monocular vision. Implemented on a DJI Tello platform, the system combines monocular depth estimation using Depth Anything V2 with classical computer vision and lightweight deep learning models for scene understanding, victim detection, and hazard recognition. The framework consists of two independent behaviors: (i) corridor exploration with automatic door detection, room entry, OCR-based room identification, and victim inspection; and (ii) autonomous stair ascent based on TRISTAR (TRI-Signal STair Ascent Recognition), a novel triple-sensor fusion method that integrates structural cues (Sobel filtering), texture analysis (multi-scale Gabor filtering), and geometric depth from monocular depth estimation. Evaluation used real indoor flights in a university building. Depth calibration reduced relative depth error from 27.4% to below 10%, while the door detection algorithm reached a precision of 0.93 and an F1-score of 0.91. A dedicated ablation study shows that multi-sensor fusion significantly improves stair-recognition robustness compared to individual sensing modalities, and a failure-case analysis delineates the limits of monocular perception under challenging lighting and reflective surfaces. The results demonstrate that reliable indoor exploration and stair traversal are achievable on resource-constrained platforms without specialized ranging hardware, a practical, cost-effective solution for rapid SAR deployment.